High-temperature Mechanical Properties and Their Influence Mechanisms of ZrC-Modified C-SiC Ceramic Matrix Composites up to 1600 °C

In order to understand the influence of the mechanisms of ZrC nanoparticles on the high-temperature mechanical properties of C-SiC ceramic matrix composites, the mechanical properties were measured from room temperature (RT) to 1600 °C under vacuum. The microstructures features were characterized by scanning electron microscopy. In comparison with the composites without ZrC nanoparticles, the ZrC-modified composite presented better mechanical properties at all temperatures, indicating that the mechanical properties could be improved by the ZrC nanoparticles. The ZrC nanoparticles could reduce the residual silicon and improve the microstructure integrity of composite. Furthermore, the variation of flexural strength and the flexural modulus showed an asynchronous trend with the increase of temperature. The flexural strength reached the maximum value at 1200 °C, but the highest elastic modulus was obtained at 800 °C. The strength increase was ascribed to the decrease of the thermally-induced residual stresses. The degradation of mechanical properties was observed at 1600 °C because of the microstructure deterioration and the formation of strongly bonded fiber–matrix interface. Therefore, it is concluded that the high temperature mechanical properties under vacuum were related to the consisting phase, the matrix microstructure, and the thermally-induced residual stresses.