Negshell casting: 3D-printed structured and sacrificial cores for soft robot fabrication

Soft robot fabrication by casting liquid elastomer often requires multiple steps of casting or skillful manual labor. We present a novel soft robotic fabrication technique: negshell casting (negative-space eggshell casting), that reduces the steps required for fabrication by introducing 3D-printed thin-walled cores for use in casting that are meant to be left in place instead of being removed later in the fabrication process. Negshell casting consists of two types of cores: sacrificial cores (negshell cores) and structural cores. Negshell cores are designed to be broken into small pieces that have little effect on the mechanical structure of the soft robot, and can be used for creating fluidic channels and bellows for actuation. Structural cores, on the other hand, are not meant to be broken, and are for increasing the stiffness of soft robotic structures, such as endoskeletons. We describe the design and fabrication concepts for both types of cores and report the mechanical characterization of the cores embedded in silicone rubber specimens. We also present an example use-case of negshell casting for a single joint soft robotic finger, along with an experiment to demonstrate how negshell casting concepts can aid in force transmission. Finally, we present real-world usage of negshell casting in a 6 degree-of-freedom three-finger soft robotic gripper, and a demonstration of the gripper in a robotic pick-and-place task. A companion website with further details about fabrication (as well as an introduction to molding and casting for those who are unfamiliar with the terms), engineering file downloads, and experimental data is provided at https://negshell.github.io/.