Percolation Characteristics and Fluid Movability Analysis in Tight Sandstone Oil Reservoirs

[Image: see text] The development of tight oil has started relatively late, and the flow mechanisms and fluid movability are still research spotlights. The goal of this paper is to investigate the percolation characteristics and fluid movability of the Chang 6 tight sandstone oil layer in the Upper Triassic Yanchang Formation, Ordos Basin, China. Results show that (1) at low flow velocity, the percolation curve of flow velocity vs pressure gradient is a concave-up nonlinear curve and does not pass through the origin. It is more difficult for oil flow than water flow in cores with similar permeability due to rock wettability and fluid apparent mobility. The application of back pressure makes the nonlinear stage eliminated and the percolation character improved. (2) Two-phase flow tests reveal that oil-phase permeability decreases faster in samples with lower permeability, and the coexistent flow region of oil and water is relatively narrow. The contribution of oil recovery mainly happens at the early stage. The permeability at the isotonic point reduces with the decrease of sample permeability. (3) Flow during water flooding can be roughly divided into four stages according to the injection pressure and flow change. The injection pressure experiences stages of increasing to a peak, then decreasing, and finally becoming stable, accompanied by an increase of oil production until water breaks through. (4) The pore throats of the target reservoir mainly range from 0.001 to 10 μm, and the bound water mainly distributes in pores less than 0.2 μm. The irreducible water saturation is 30–35%, and the movable fluid saturation is 65–70%, mainly distributed in pores at 0.2–10.0 μm with a maximum of 2.0 μm. The results will supplement the existing knowledge of percolation characters and fluid movability in tight sandstone oil reservoirs.