Laboratory Methods for Assessing the Influence of Improper Asphalt Mix Compaction on Its Performance

Compaction index is one of the most important technological parameters during asphalt pavement construction which may be negatively affected by wrong asphalt paving machine set, weather conditions, or the mix temperature. Presented laboratory study analyzes the asphalt mix properties in case of inappropriate compaction. The reference mix was designed for AC 11 S wearing layer (asphalt concrete for wearing layer with maximum grading of 11 mm). Asphalt mix samples used in the tests were prepared using Marshall device with the compaction energy of 2 × 20, 2 × 35, 2 × 50, and 2 × 75 blows as well as in a roller compactor where the slabs were compacted to various heights: 69.3 mm (+10% of nominal height), 66.2 mm (+5%), 63 mm (nominal), and 59.9 mm (−5%) which resulted in different compaction indexes. Afterwards the samples were cored from the slabs. Both Marshall samples and cores were tested for air void content, stiffness modulus in three temperatures, indirect tensile strength, and resistance to water and frost indicated by ITSR value. It was found that either insufficient or excessive level of compaction can cause negative effect on the road surface performance.