Experimental Research on Quality Parameters of Recycled Concrete

Concrete itself, and issues relating to the recycling and management of reinforced concrete waste, are highly relevant, especially when urban expansion is being achieved by increased building construction volumes. This research investigates concrete waste and its (re)usage possibilities and resolves several major issues related to the question of how natural materials can be replaced by compounds made from concrete waste, thereby saving natural resources. The experiment was carried out using concrete mixtures, which were combined with natural aggregates and crushed concrete waste (fraction 4/16). The resulting mix of concrete was achieved using natural aggregates, thus replacing natural aggregates with waste, which had partially and fully replaced bulky aggregates with crushed concrete waste. The main aim of the investigation was to investigate how aggregates made from crushed concrete waste impact the properties of concrete. The exothermic effect on the concrete mixture during the hardening process was investigated. Furthermore, a macrostructural analysis of hardened concrete was conducted using scanned sample images; the adhesion zone between newly formed concrete stone and aggregates derived from natural rock from crushed concrete waste was investigated. Using an electron microscope to observe aggregate from crushed concrete waste and the contact zone of hardened cement stone revealed that the aggregate from waste adheres poorly with hardened cement stone. Furthermore, both the mechanical properties of new, hardened concrete and determined resistance to frost indicators are weak. Concrete density and compression strength decreased (by up to 8% and up to 18%, respectively), and absorption increased almost twofold due to aggregates derived from crushed concrete waste, since their cleavage strength indicator was twice as high, while water absorption was four times higher than that of natural aggregate. The results indicate that recycled concrete obtained from demolished buildings is environmentally sustainable and can be recommended for lower quality concrete for use in related engineering projects.