Dataset of wind blow sand erosion test on ultrasonic surface treated cementitious composites

In this paper, we take cement mortar and paste as specimens, a novelty method named ultrasonic surface treatment(UST) was employed to form a hardening surface layer on cementitious specimens to improve its wind-blown sand erosion resistance, surface hardness and apparent density. The specimens with curing ages of 1-day, 3-days, 7-days, and 28-days were adopted. The wind blown sand erosion test was carried out in a wind-blown sand erosion test system, which simulated a wind blown sand environment of a wind speed of 30 m/s and a sand feed rate of 30 g/min. The erosion angle of 30°, 60°, 90° were adopted. The mass loss in erosion process was measured, then the erosion resistance was calculated. The surface hardness was tested with a Vickers micro hardness tester. The apparent density of cement paste was measured with mass volume method. The data provided reveal the improvement on wind blown sand erosion resistance, surface hardnenss and apparent density of cementitious materials with ultrasonic surface treatment. That may be used in the investigation on improving the erosion resistance and to evaluate the effectiveness of the UST method on cementitious materials.