Sediment structure at the equatorial mid-atlantic ridge constrained by seafloor admittance using data from the PI-LAB experiment

Well-constrained marine sediment characteristics (sediment thickness and shear wave velocity) are important not only for the study of climate over geologic times scales but also for correcting and accounting for its presence in seismic data used to investigate deeper structures. We use data from the PI-LAB (Passive Imaging of the Lithosphere Asthenosphere Boundary) experiment, which consisted of 39 broadband ocean bottom seismometers deployed at the Equatorial Mid-Atlantic Ridge near the Chain fracture zone covering 0–80 Myr old seafloor. We compute admittance between the pressure to the vertical displacement at the seafloor at frequencies between 0.1 and 0.2 Hz for microseism-generated Rayleigh waves for 18 stations where data quality is good to determine the sediment thickness and shear wave velocity. We find a general trend of increasing sediment thickness with the seafloor ages, as expected with sediment thicknesses that range from 10–450 m and, shear wave velocities that range from 0.05–0.34 km/s. We find sediment thickness varies almost uniformly across both sides of the ridge, and it indicates that both sides experienced a similar sedimentation process. Our results are in good agreement with the global sediment model that is based on drilling cores and active source experiments, but thinner by up to 50 m at several stations on seafloor older than 25 My. Overlap of the 95% confidence regions between admittance and Ps estimates for thickness and shear velocity is found at 15 stations where we have both Ps and admittance estimates. It suggests that both methods yield accurate estimates for sediment thickness. In addition, our admittance result extends the lateral resolution of sediment characteristics to stations that were not previously resolved by Ps.