Tapioca Dextrin as an Alternative Carrier in the Spray Drying of Fruit Juices—A Case Study of Chokeberry Powder

This paper analyses the semi-industrial process of spray drying chokeberry juice with carbohydrate polymers used as a carrier. Tapioca dextrin (Dx) was proposed and tested as an alternative carrier and it was compared with maltodextrin carriers (MDx), which are the most common in industrial practice. The influence of selected process parameters (carrier type and content, inlet air temperature, atomiser speed) on the characteristics of dried chokeberry powder was investigated. The size and microstructure of the powder particles, the bulk and apparent density, porosity, flowability, yield and bioactive properties were analysed. In comparison with MDx, the Dx carrier improved the handling properties, yield and bioactive properties. An increase in the Dx carrier content improved the phenolic content, antioxidant capacity, flowability and resulted in greater yield of the powder. An increase in the drying temperature increased the size of particles and improved powder flowability but it also caused a greater loss of the phenolic content and antioxidant capacity. The rotary atomizer speed had the most significant effect on the bioactive properties of obtained powders, which increased along with its growth. The following conditions were the most favourable for chokeberry juice with tapioca dextrin (Dx) as the carrier: inlet air temperature, 160 °C; rotary atomizer speed, 15,000 rpm; and Dx carrier content, 60%.