A Virtual Instrument for Road Vehicle Classification Based on Piezoelectric Transducers

This paper describes a virtual instrument capable of the automatic and quasi-instantaneous classification of a vehicle according to category when it is driving along the road. The vehicle’s classification is based on accurate measurements of both the vehicle’s speed and its wheelbase. Our research is focused on achieving accurate speed and wheelbase measurements and then determining the category of the vehicle through the developed software. The vehicle categorization is based on the wheelbase measurements and the number of axles and metal masses of the vehicle. The system has a complementary magnetic sensor, which helps in classifying the vehicle when the wheelbase measurement could be representative of different categories, and a camera to confirm the results of the experiment. The proposed measurement system presents a novel method for classifying vehicles according to type using piezoelectric transducers (piezo sensors). In addition, no system references have been found that encompass the functionalities of the presented system based on the information of only two piezoelectric transducers. The system has important advantages over current alternatives (systems based on inductive loops, cameras, fiber optic sensors or lasers), the installation is simple and non-invasive and with a success rate of the classification greater than 90%. The system consists of a signal acquisition point on the pavement, signal conditioning hardware and a data acquisition (DAQ) module, which links the hardware and the virtual instrument developed in LabVIEW(®). Finally, the system has been tested on the road with real traffic, and the experimental results are presented and discussed in this paper.