Reducing contrast dose using virtual monoenergetic imaging for aortic CTA

Three‐dimensional computed tomographic angiography (3D‐CTA) is widely used to evaluate the inner diameters of vessels and the anatomical vascular structure prior to endoscopic aortic surgery or transcatheter valve implantation. Virtual monoenergetic imaging (VMI) is a new application in dual‐energy CT (DECT). We evaluated the potential for contrast dose reduction in preoperative aortic CTA using VMI. To evaluate performance in terms of image quality and vessel shape, we quantified the contrast‐to‐noise ratio (CNR) and the vessel diameter using a cylinder phantom we developed, and used volume rendering to assess visual quality. All VMI had improved CNR values compared with conventional 120 kVp images at an iodine content of 15 mgI/mL. In each image, a virtual mono‐energy of 40 keV yielded the highest CNR value, and an iodine content of 9 mgI/mL was comparable to that of conventional images with an iodine content of 15 mgI/mL. The circularity indices (CI) of the vascular model at 15, 12, and 9 mgI/mL were similar to those of the reference condition using conventional voltages; however, CI was degraded at iodine contents of 6 and 3 mgI/mL with VMI. In the case of iodine content of 15 mgI/mL, VMI was superior, with conventional image by visual evaluation. In the cases of iodine contents of 12 and 9 mgI/mL, image quality was judged to be almost the same level when comparing 12 and 9 mgI/mL to conventional images. In the case of 6 and 3 mgI/mL, reference image using conventional technique was superior to that of VMI. We demonstrated in that decreasing contrast iodine content is possible using VMI with an energy of 40 keV for preoperative aortic 3D‐CTA.