Evaluation and Characterization of a Durable Composite Phase Thermal Barrier Coating in Solid Particle Erosion and Burner Rig Tests

A new concept of composite phase ceramic had been proposed for the topcoat of a durable thermal barrier coating (TBC) system which is one of the critical technologies for advanced turbine engines. The composite phase TBCs showed promising performance related benefits over conventional single phase TBCs, including durability, material affordability, thermal stability and low thermal conductivity. The present work is to continue the effort to exploring the TBC behaviors of erosive wear by solid particle erosion test and thermal cyclic shock by special burner rig test. In the erosion test, the investigation was focused on the most important characteristics of erosion test results using different characterization methods, including the variations of erosion damages with impingement angle and finally the effect of high temperature sintering. In the burner rig test, the TBC was exposed to a rapidly thermal cycling condition introduced by a high heat flux and high-velocity combustion torch. The TBC damages and failure modes were identified and explained in terms of microstructural observation and mechanism discussion. The composite phase c + t′ TBC demonstrated improved erosion resistance relative to a Gd(2)Zr(2)O(7) TBC and equivalent thermal shock resistance to a conventional 8YSZ TBC.