An electrochemical study of acrylate bone adhesive permeability and selectivity change during in vitro ageing: A model approach to the study of biomaterials and membrane barriers

This study assessed the solute permeability of a family of UV and moisture cured acrylates-based adhesives during in vitro ageing in pH 7.4 buffer. Acrylates have a potential role in bone fracture fixation, but their inability to allow microsolute exchange between the fractured bone surfaces may contribute to ineffective healing. Cyclic voltammetry and chronoamperometry were used to determine the diffusion coefficients for various electrochemically active probe molecules (O(2,) H(2)O(2), acetaminophen, catechol, uric acid and ascorbic acid) at proprietary acrylic, urethane – acrylate and cyanoacrylate adhesives. All adhesives proved to be impermeable for up to 9 days ageing, following which a near-exponential increase in permeability resulted for all solutes. At 18 days, the diffusion coefficients were in the range of 10(−5) cm(2)s(−1) for O(2) and H(2)O(2) and 10(−6) cm(2)s(−1) for the organic solutes; no transport selectivity was seen between the latter. Adhesive joint strength showed a direct, inverse, correlation with permeability, with the more hydrophilic cyanoacrylates showing the greatest loss of strength. Adhesive permeabilisation does not appear to be compatible with the retention of bonding strength, but it serves as a new non-destructive predictor of adhesion strength change during ageing and practical use.