Mechanical Joining of Fibre Reinforced Polymer Composites to Metals—A Review. Part I: Bolted Joining

As the fibre reinforced plastic composites gain larger and larger share in industry, the problem of joining them with metal elements becomes significant. The current paper is the first part of the literature review, which gathers and evaluates knowledge about methods suitable for mechanical joining of composite and metal elements. This paper concerns bolted joining, because this method of mechanical joining is widely used for joining composite materials. The paper describes failure modes of bolted joints in composite materials, the influence of the bolt clamping torque, the clearance between the bolt and the hole and aging on the performance of the joint, drilling techniques used in composite materials in order to minimize damages, different fastener types, inspection techniques, and finally, the techniques that have been developed in order to improve the strength of the bolted joints in composites. Since the hole drilled in a composite material in order to perform bolted joining is a weak point of the structure, those techniques: bonded inserts, titanium foil internal inserts, fibre steering, additional reinforcement, and moulded holes, mainly aim to improve the strength of the hole in the composite. The techniques have been discussed in details and compared with each other in the summary section.