Microincision vitrectomy surgery: experimental visualization and quantification of vitreous contamination

BACKGROUND: To visualize and quantify vitreous contamination following microincision vitrectomy surgery (MIVS) using an experimental vitreous contamination model (EVCM). METHODS: Enucleated porcine eyes with fluoresbrite carboxylate microspheres applied to the conjunctival surface were used as a type 1 EVCM. Twenty-five- or 27-gauge (G) trocar cannulas were inserted through the conjunctiva and sclera, followed by the placing and opening of an infusion cannula. These procedures were monitored by an intraocular fiber catheter. Secondly, condensed microspheres were applied to an excised sheet of porcine sclera to serve as type 2 EVCM. Twenty-five- or 27-G trocar cannulas were inserted perpendicularly through the top of the sclera where the condensed microspheres were applied, an infusion cannula was inserted, 0.1 mL of saline solution injected through the infusion cannula, and samples collected. The fluorescence strength of samples was then measured using fluorophotometry. RESULTS: We visually detected fluorescent microspheres in 10/10 eyes with 25-G and 10/10 with 27-G MIVS. In the experimental quantification study, each MIVS gauge value was significantly higher than the control (P < 0.01). However, there was no significant difference between 25-G and 27-G MIVS. CONCLUSIONS: MIVS carries the risk of introducing contamination directly into the eyes when the trocar cannula is inserted and infusion cannula is opened, even when a 27-G MIVS is used. Our study has shown it is essential that the surgeon be aware of the possibility of introducing contamination from the conjunctiva at all times during MIVS. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1186/s12886-020-01712-6.