Cargando…

On the Design of Dual-Polarised Linear Antenna Arrays with Enhanced Port-to-Port Isolation

The paper describes the process of designing a dual-polarised linear antenna array with enhanced port-to-port isolation, with the example of a four-element array with isolation better than 60 dB for the U-NII 5.15–5.925 GHz band. As a single antenna, dual-polarised electromagnetically coupled micros...

Descripción completa

Detalles Bibliográficos
Autores principales: Wójcik, Dariusz, Surma, Maciej, Noga, Artur, Magnuski, Mirosław
Formato: Online Artículo Texto
Lenguaje:English
Publicado: MDPI 2020
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7663440/
https://www.ncbi.nlm.nih.gov/pubmed/33121027
http://dx.doi.org/10.3390/s20216105
Descripción
Sumario:The paper describes the process of designing a dual-polarised linear antenna array with enhanced port-to-port isolation, with the example of a four-element array with isolation better than 60 dB for the U-NII 5.15–5.925 GHz band. As a single antenna, dual-polarised electromagnetically coupled microstrip antennas were used with port-to-port isolation not exceeding 25 dB. A significant improvement in the isolation of the array was achieved thanks to the application of a dedicated feeding network. On the basis of theoretical analysis, a mathematical model describing port-to-port isolation was developed. Circuit and full-wave simulations were carried out to show the influence of electromagnetic couplings between antennas and/or the microstrip lines of the feeding network and the selection of phase shifters/power dividers on the isolation. The fabricated prototype is characterised by a gain of about 14 dBi, polarisation purity of at least −27 dB within the main lobe and close to expectations isolation better than 57 dB within the whole operational band.