Experimental Studies on the Dynamic Memcapacitance Modulation of the ReO(3)@ReS(2) Composite Material-Based Diode

In this study, both memcapacitive and memristive characteristics in the composite material based on the rhenium disulfide (ReS(2)) rich in rhenium (VI) oxide (ReO(3)) surface overlayer (ReO(3)@ReS(2)) and in the indium tin oxide (ITO)/ReO(3)@ReS(2)/aluminum (Al) device configuration is presented. Comprehensive experimental analysis of the ReO(3)@ReS(2) material properties’ dependence on the memcapacitor electrical characteristics was carried out by standard as well as frequency-dependent current–voltage, capacitance–voltage, and conductance–voltage studies. Furthermore, determination of the charge carrier conduction model, charge carrier mobility, density of the trap states, density of the available charge carrier, free-carrier concentration, effective density of states in the conduction band, activation energy of the carrier transport, as well as ion hopping was successfully conducted for the ReO(3)@ReS(2) based on the experimental data. The ITO/ReO(3)@ReS(2)/Al charge carrier conduction was found to rely on the mixed electronic–ionic processes, involving electrochemical metallization and lattice oxygen atoms migration in response to the externally modulated electric field strength. The chemical potential generated by the electronic–ionic ITO/ReO(3)@ReS(2)/Al resistive memory cell non-equlibrium processes leads to the occurrence of the nanobattery effect. This finding supports the possibility of a nonvolatile memory cell with a new operation principle based on the potential read function.