Effect of Initial State and Deformation Conditions on the Hot Deformation Behavior of M50NiL Steel

M50NiL steel, which belongs to a new generation of case-hardening steels used in aerospace bearing applications, is used mainly for the manufacturing of aerospace transmission components that operate under high temperatures. In this study, the effects of the hot deformation parameters and the initial microstructure on the hot deformation behavior of M50NiL steel were investigated through Gleeble-3500 isothermal hot compression tests. The experimental results demonstrated that the critical stain of dynamic recrystallization and the deformation activation energy of the coarse-grained samples were higher than those of the fine-grained samples. This is attributed to the difficulty of deformation and the dynamic recrystallization behavior of coarse-grained samples. Moreover, fine-grained samples contain a large number of dispersed phases, which can pin the grain boundaries and inhibit the growth of recrystallized grains. Such phenomena are beneficial for obtaining finer and more uniform microstructures in M50NiL steel. The experimental results can provide a useful reference for preparing M50NiL steel with excellent mechanical properties.