GaInP nanowire arrays for color conversion applications

Color conversion by (tapered) nanowire arrays fabricated in GaInP with bandgap emission in the red spectral region are investigated with blue and green source light LEDs in perspective. GaInP nano- and microstructures, fabricated using top-down pattern transfer methods, are derived from epitaxial Ga(0.51)In(0.49)P/GaAs stacks with pre-determined layer thicknesses. Substrate-free GaInP micro- and nanostructures obtained by selectively etching the GaAs sacrificial layers are then embedded in a transparent film to generate stand-alone color converting films for spectrophotometry and photoluminescence experiments. Finite-difference time-domain simulations and spectrophotometry measurements are used to design and validate the GaInP structures embedded in (stand-alone) transparent films for maximum light absorption and color conversion from blue (450 nm) and green (532 nm) to red (~ 660 nm) light, respectively. It is shown that (embedded) 1 μm-high GaInP nanowire arrays can be designed to absorb ~ 100% of 450 nm and 532 nm wavelength incident light. Room-temperature photoluminescence measurements with 405 nm and 532 nm laser excitation are used for proof-of-principle demonstration of color conversion from the embedded GaInP structures. The (tapered) GaInP nanowire arrays, despite very low fill factors (~ 24%), can out-perform the micro-arrays and bulk-like slabs due to a better in- and out-coupling of source and emitted light, respectively.