Impact of Perlite on the Properties and Stability of Water-Based Mud in Elevated-Temperature Applications

[Image: see text] Barite settling is one of the common drilling fluid issues encountered while drilling deep wells. In this study, the effect of perlite on the properties and stability of water-based drilling fluid was investigated. Perlite is an inexpensive additive used in different industrial applications such as bricks, concrete, thermal insulators, sludge absorbents, fillers, tiles, ruminants, and poultry. Perlite additive was also introduced to the oil industry in drilling applications as an effective fluid loss control agent to reduce the drilling fluid invasion into the formations. Perlite was added to the drilling fluid in various concentrations, ranging between 0 and 3.0 lb/bbl. The sag test was performed to assess the drilling fluid’s stability under dynamic and static conditions at a temperature of 120/250 °F. Then, the impact of perlite on the properties of drilling fluid was assessed by measuring the density and pH at room temperature. While the rheological, viscoelastic, and filtration properties were evaluated at 250 °F. This study showed that an increase in perlite concentration, from 0 to 3 lb/bbl, slightly reduced the pH of the drilling mud; however, all of the values were within the acceptable pH range (9–11). In contrast, this concentration of perlite had an immeasurable impact on drilling fluid density. Perlite enhanced the drilling fluid’s homogeneity and stability by reducing the dynamic and static sag factors, and 3.0 lb/bbl perlite was adequate to eliminate barite sag at a temperature up to 250 °F. Perlite was found to be effective in improving the rheological and viscoelastic properties. A significant enhancement of filtration properties was observed by the reduction in filtrate volume and filter cake thickness by 64 and 31%, respectively.