Study of Polyaniline/Poly(Sodium 4-Styrenesulfonate) Composite Deposits Using an Electrochemical Quartz Crystal Microbalance for the Modification of a Commercial Anion Exchange Membrane

One of the intended applications for the modification of ion exchange membranes with polyaniline (PAni) is to use it as a matrix to include chemical species that confer a special property such as resistance to fouling or ion selectivity. In particular, the inclusion of polyelectrolyte molecules into the PAni matrix appears to be the way to modulate these properties of selective membranes. Therefore, it must be clearly understood how the polyelectrolyte is incorporated into the matrix of polyaniline. Among the results obtained in this paper using poly(sodium 4-styrenesulfonate) (PSS) and an electrochemical quartz crystal microbalance, the amount of polyelectrolyte incorporated into PAni is found to be proportional to the PSS concentration in solution if its value is between 0 and 20 mM, while it reaches a maximum value when the PSS in solution is greater than 20 mM. When the anion exchange membranes are modified with these composite deposits, the transport number of chloride was found to decrease progressively (when the PSS concentration in solution is between 0 and 20 mM) to reach a practically constant value when a concentration of PSS greater than 20 mM was used.