Effect of Ion Corrosion on 517 Phase Stability

The main hydration product and source of strength of magnesium oxysulfate cement is 5Mg(OH)(2)·MgSO(4)·7H(2)O (known as the 517 phase). Hardened pastes containing 92.38% of the 517 phase were synthesized in this study, and the influence of different types of chloride solutions on the stability and compressive strength of the 517 phase was investigated. X-ray diffraction and the Rietveld method were used to investigate the 517 phase transition in chloride solutions. Ion chromatography and inductively coupled plasma spectrometry were used to analyze the ion concentrations of the chloride solutions. Scanning electron microscopy and mercury injection porosimetry were used to investigate the effect of ion erosion on the microstructure and pore size distribution. The results showed that the crystal structure of 517 phase remained stable upon immersion in chloride solutions (except for the CaCl(2) solution) up to 28 days, and there was no discernible attenuation in the compressive strength of the hardened pastes. Immersion of the 517 phase in CaCl(2) solution for 28 days caused Ca(2+) ions to combine with SO(4)(2−) groups to generate CaSO(4)·2H(2)O, thereby decomposing the 517 phase. An increase in the concentration of magnesium and sulfate ions in the immersion solutions confirmed the decomposition of the 517 phase. Gel-like Mg(OH)(2) was observed in the microstructure of the decomposed 517 phase, and the decomposition of the 517 phase increased the porosity of the hardened pastes.