Cobalt Oxide Nanograins and Silver Nanoparticles Decorated Fibrous Polyaniline Nanocomposite as Battery-Type Electrode for High Performance Supercapattery

In this study, silver (Ag) and cobalt oxide (Co(3)O(4)) decorated polyaniline (PANI) fibers were prepared by the combination of in-situ aniline oxidative polymerization and the hydrothermal methodology. The morphology of the prepared Ag/Co(3)O(4)@PANI ternary nanocomposite was studied by scanning electron microscopy and transmission electron microscopy, while the structural studies were carried out by X-ray diffraction and X-ray photoelectron spectroscopy. The morphological characterization revealed fibrous shaped PANI, coated with Ag and Co(3)O(4) nanograins, while the structural studies revealed high purity, good crystallinity, and slight interactions among the constituents of the Ag/Co(3)O(4)@PANI ternary nanocomposite. The electrochemical performance studies revealed the enhanced performance of the Ag/Co(3)O(4)@PANI nanocomposite due to the synergistic/additional effect of Ag, Co(3)O(4) and PANI compared to pure PANI and Co(3)O(4)@PANI. The addition of the Ag and Co(3)O(4) provided an extended site for faradaic reactions leading to the high specific capacity. The Ag/Co(3)O(4)@PANI ternary nanocomposite exhibited an excellent specific capacity of 262.62 C g(−1) at a scan rate of 3 mV s(−1). The maximum energy and power density were found to be 14.01 Wh kg(−1) and 165.00 W kg(−1), respectively. The cyclic stability of supercapattery (Ag/Co(3)O(4)@PANI//activated carbon) consisting of a battery type electrode demonstrated a gradual increase in specific capacity with a continuous charge–discharge cycle until ~1000 cycles, then remained stable until 2500 cycles and later started decreasing, thereby showing the cyclic stability of 121.03% of its initial value after 3500 cycles.