Development of a novel Artemia eggshell-zirconium nanocomposite for efficient fluoride removal

Fluoride pollution in water has attracted widespread concern worldwide. In this study, an Artemia eggshell-zirconium (Aes-Z) nanocomposite has been used for fluoride removal. Material characterization results showed that nano-ZrO(2) was immobilized on the inner surface of the Artemia eggshell, and there was no pore blockage on the composite material. Various parameters influencing on the fluoride removal, including treatment time, composite dosage, pH, initial fluoride concentration, and other anions, were analyzed. The removal efficiency of the composite material was better than that of the single zirconia material. The removal percentage of fluoride reached 93% in 30 min with an initial fluoride concentration of 10 mg/L and a nanocomposite dosage of 8.0 g/L. The composite material had a high removal efficiency for fluoride in the pH region 4.0–10.0. The adsorption of fluoride was not influenced by the common anions (e.g., Cl(-), SO(4)(2-), and NO(3)(-)) in water. The regeneration revealed that the Aes-Z composite material could be reused and remove fluoride effectively in four cycles. The pseudo-second-order rate model adequately represented the adsorption kinetics of the Aes-Z composite material. A possible, defluoridation mechanism of the Aes-Z composite material was also proposed. This study demonstrates that Aes-Z is a promising adsorbent material for fluoride removal.