Intercalated Poly (2-acrylamido-2-methyl-1-propanesulfonic Acid) into Sulfonated Poly (1,4-phenylene ether-ether-sulfone) Based Proton Exchange Membrane: Improved Ionic Conductivity

A series of hybrid proton exchange membranes were synthesized via in situ polymerization of poly (2-acrylamido-2-methyl-1-propanesulfonic acid) PMPS with sulfonated poly (1,4-phenylene ether-ether-sulfone) (SPEES). The insertion of poly (2-acrylamido-2-methyl-1-propanesulfonic acid) PMPS, between the rigid skeleton of SPEES plays a reinforcing role to enhance the ionic conductivity. The synthesized polymer was chemically characterized by fourier-transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance (1)H NMR spectroscopy to demonstrate the successful grafting of PMPS with the pendent polymer chain of SPEES. A variety of physicochemical properties were also investigated such as ion exchange capacity (IEC), proton conductivity, water uptake and swelling ratio to characterize the suitability of the formed polymer for various electrochemical applications. SP-PMPS-03, having the highest concentration of all PMPS, shows excellent proton conductivity of 0.089 S cm(−1) at 80 °C which is much higher than SPEES which is ~0.049 S cm(−1). Optimum water uptake and swelling ratio with high conductivity is mainly attributed to a less ordered arrangement polymer chain with high density of the functional group to facilitate ionic transport. The residual weight was 93.35, 92.44 and 89.56%, for SP-PMPS-01, 02 and 03, respectively, in tests with Fenton’s reagent after 24 h. In support of all above properties a good chemical and thermal stability was also achieved by SP-PMPS-03, owing to the durability for electrochemical application.