Reduced sampling rate Kalman filters for carrier phase and frequency offset tracking in 200 Gbps 16 QAM coherent communication system

We propose 1 state and 2 state multi-step Kalman filters (MKFs) to estimate and compensate CFO, LPN and NLPN in long-haul coherent fiber-optic communication systems. The proposed filters generate state estimates once every m symbols and therefore operate at a reduced sampling rate compared to conventional KFs that perform symbol by symbol processing. No computations are performed to obtain phase estimates of the intermediate [Formula: see text] samples; instead, the present and previous estimates are averaged and used to derotate the intermediate [Formula: see text] samples which are then demodulated to recover the transmitted symbols. This reduces the computational load on the receiver DSP. Further, in order to improve estimation accuracy, we adaptively vary the process noise covariance Q. Simulation results of 200 Gbps PDM 16 QAM system over 12 spans shows that the proposed 1 state MKF can reduce the sampling rate requirement by a factor of [Formula: see text] with Q-factor degradation of 1.32 dB compared to single-step KF at linewidth of 100 kHz. The 2 state MKF tracks PN and CFO with a maximum step size of [Formula: see text] for a CFO of 100 MHz at linewidth of 100 kHz. We also study the dynamic performance of the proposed algorithms by applying step change to CFO. The 2 state MKF with adaptive Q is able to track a step change of 400 MHz of CFO with [Formula: see text] and 3 with high estimation accuracy but slower convergence time compared to the non-adaptive 2 state MKF. Finally, we study the computational requirements of the proposed MKFs and show that they offer significant reduction in computations compared to single-step KF thus making the proposed filters suitable for hardware implementation.