Membrane-Based In Situ Mid-Infrared Spectroscopic Ellipsometry: A Study on the Membrane Affinity of Polylactide-co-glycolide Nanoparticulate Systems

[Image: see text] Mid-infrared (IR) ellipsometry of thin films and molecule layers at solid–liquid interfaces has been a challenge because of the absorption of light in water. It has been usually overcome by using configurations utilizing illumination through the solid substrate. However, the access to the solid–liquid interface in a broad spectral range is also challenging due to the limited transparency of most structural materials in the IR wavelength range. In this work, we propose a concept of a microfabricated analysis cell based on an IR-transparent Si membrane with advantages of a robust design, flexible adaptation to existing equipment, small volume, multiple-angle capabilities, broad wavelength range, and opportunities of multilayer applications for adjusted ranges of high sensitivity. The chamber was prepared by 3D micromachining technology utilizing deep reactive ion etching of a silicon-on-insulator wafer and bonded to a polydimethylsiloxane microfluidic injection system resulting in a cell volume of approximately 50 μL. The mechanical stability of the 2 and 5 μm-thick membranes was tested using different “backbone” reinforcement structures. It was proved that the 5 μm-thick membranes are stable at lateral cell sizes of 5 mm by 20 mm. The cell provides good intensity and adjustment capabilities on the stage of a commercial mid-IR ellipsometer. The membrane configuration also provides optical access to the sensing interfaces at a broad range of incident angles, which is a significant advantage in many potential sensing structure configurations, such as plasmonic, multilayer, 2D, or metamaterial applications.