Trajectory log analysis and cone‐beam CT‐based daily dose calculation to investigate the dosimetric accuracy of intensity‐modulated radiotherapy for gynecologic cancer

This study evaluated unexpected dosimetric errors caused by machine control accuracy, patient setup errors, and patient weight changes/internal organ deformations. Trajectory log files for 13 gynecologic plans with seven‐ or nine‐beam dynamic multileaf collimator (MLC) intensity‐modulated radiation therapy (IMRT), and differences between expected and actual MLC positions and MUs were evaluated. Effects of patient setup errors on dosimetry were estimated by in‐house software. To simulate residual patient setup errors after image‐guided patient repositioning, planned dose distributions were recalculated (blurred dose) after the positions were randomly moved in three dimensions 0–2 mm (translation) and 0°–2° (rotation) 28 times per patient. Differences between planned and blurred doses in the clinical target volume (CTV) D(98%) and D(2%) were evaluated. Daily delivered doses were calculated from cone‐beam computed tomography by the Hounsfield unit‐to‐density conversion method. Fractional and accumulated dose differences between original plans and actual delivery were evaluated by CTV D(98%) and D(2%). The significance of accumulated doses was tested by the paired t test. Trajectory log file analysis showed that MLC positional errors were −0.01 ± 0.02 mm and MU delivery errors were 0.10 ± 0.10 MU. Differences in CTV D(98%) and D(2%) were <0.5% for simulated patient setup errors. Differences in CTV D(98%) and D(2%) were 2.4% or less between the fractional planned and delivered doses, but were 1.7% or less for the accumulated dose. Dosimetric errors were primarily caused by patient weight changes and internal organ deformation in gynecologic radiation therapy.