A study of bacteria adhesion and microbial corrosion on different stainless steels in environment containing Desulfovibrio vulgaris

Stainless steel is an important material used in many applications due to its mechanical strength and corrosion-resistant properties. The high corrosion resistance of stainless steel is provided by the passive film. Different stainless steels have different alloy elements and surface properties which could have a significant influence on bacterial attachment to the surface and thus might result in different microbial corrosion behaviours. In this study, the effect of adhesion of sulfate-reducing bacteria (SRB) on corrosion behaviour in artificial seawater on different stainless steels was investigated. Stainless steel materials used were SS 410, SS 420, SS 316 and DSS 2205 and pure chromium. The contact angle was measured to study the effect of surface properties of materials. Adhesion was measured by counting cells attached to the surface of materials. The corrosion behaviour of the materials was measured by electrochemical testing including measuring open circuit potential, electrochemical impedance spectroscopy and potentiodynamic behaviour. The long-term corrosion behaviour of each material was studied after six months of exposure by measuring weight loss and surface analysis with scanning electron microscope with energy-dispersive X-ray analysis. Hydrophobicity had a strong effect on bacterial attachment. Alloying elements e.g. nickel also had shown its ability to attract bacteria to adhere on the surface. However, the corrosion rate of different materials is determined not only by bacterial attachment but also by the stability of the passive film which is determined by the alloying elements, such as Mo and Cr. Chromium showed high resistance to corrosion, possibly due to toxicity on bacterial attachment. The nature of bacterial attachment and corrosion behaviour of the materials are discussed.