Evolution of the Shear Band in Cold-Rolling of Strip-Cast Fe-1.3% Si Non-Oriented Silicon Steel

Cube texture and microstructural evolution of as-cast non-oriented silicon steel (1.3% Si) during cold rolling and annealing were studied. The results showed that the as-cast microstructure with grain size in the range of 100–500 μm had a weak texture. The strong orientation was mainly located at {100} and {110} planes. A significant content of shear-deformed grains oriented with {110}<110> were obtained by cold-rolling, and many regions oriented with Cube texture were distributed in the shear bands. During cold-rolling, the orientation of the shear-deformed microstructure tilted towards the {111}<112> orientation, while the matrix orientation retained {110}<110>. On further cold-rolling, the residual part of {110}<110> experienced shear deformation, forming more shear bands, strengthening the Cube orientation. During annealing, Cube orientation grains nucleated in the shear bands leading to strong Cube texture, and corresponding B(50) was 1.83T/1.79T.