Copper Nanoparticle Loading and F Doping of Graphene Aerogel Enhance Its Adsorption of Aqueous Perfluorooctanoic Acid

[Image: see text] Perfluorooctanoic acid (PFOA) persists in the environment for a long time due to its stable physical and chemical properties, and it is harmful to the environment and biological system. In order to effectively remove PFOA from aqueous solution, Cu nanoparticles and fluorine-modified graphene aerogel (Cu/F-rGA) were fabricated by the microbubble template method. Compared with unmodified aerogels (rGA), the adsorption rate of PFOA on Cu/F-rGA was enhanced 2.68-fold. These significant improvements were assumed to benefit from the ligand exchange reaction and hydrophobic and F–F interactions. The regeneration of Cu/F-rGA maintained 73.26% with ethanol as the desorption solvent after 10 times adsorption–desorption. The fitting results of the statistical physics model showed that PFOA tended to be parallel to the adsorption site at low temperature and perpendicular at high temperature. The number of PFOA molecules connected to each adsorption site was 0.53 to 1.41, and the number of adsorption layers of PFOA on the Cu/F-rGA was between 1.63 and 2.51. Compared with the response surface methodology and artificial neural network, an adaptive neuro-fuzzy inference system had more accurate analysis and prediction results. These results provide an effective and alternative strategy to remove PFOA from aqueous solution with environment-friendly consumption.