Inhibition of Methane Hydrates Using Biodegradable Additives

[Image: see text] Prevention of hydrate plugs during transportation of oil and natural gas in the pipeline network is challenging. Certain additives are often introduced into the process to eliminate/delay plug formation. Dominantly synthetic inhibitors are deployed in large volumes (∼20 to 30% by volume) to counter the problem and are highly expensive and, in some circumstances, toxic. The search for novel additives that are eco-friendly and act as inhibitors is in demand. The present study reports the thermodynamic inhibition (THI) capacity of some vastly available natural biopowders, such as Azadirachta indica (neem), Piper betel (betel), and Nelumbo nucifera (Indian lotus) in low dosage (0.5 wt %), on methane hydrate (MH) formation. Since the gas flow is dynamic, experiments are conducted in stirred geometry by varying the speed range from 0 to 1000 rotations per minute (rpm). All of the studies are performed in the isochoric method procedure. The biopowders act as efficient thermodynamic hydrate inhibitors. Once the nucleation triggers, they act as kinetic hydrate promoters. Since sodium dodecyl sulfate (SDS) is an excellent kinetic hydrate promoter in both stirred and nonstirred geometries, the obtained results are compared with the SDS system. Hydrate nucleation is triggered at higher subcooling (∼8 to 10 K) in the presence of water-soluble bioextracts. The neem leaf extracts showed a ∼30% lower hydrate conversion than SDS in identical experimental conditions. Two-stage hydrate nucleation occurred at higher stirring speeds, and the hydrate conversion is inferior (∼6%) between the primary and secondary stages. The addition of biopowder extracts is useful in controlling hydrate formation. A small quantity of biopowders provides higher inhibition and reduces synthetic chemicals used in real-time applications.