Dislocation of rotating-hinge total knee arthroplasty

The number of rotating-hinge total knee arthroplasties (RH-TKAs) is increasing. As a result, the number of complications related to these procedures will also increase. RH-TKAs have the theoretical advantage of reducing bone implant stresses and early aseptic loosening. However, these implants also have complication rates that cannot be ignored. If complications occur, the options for revision of these implants are limited. Dislocation of RH-TKAs is rare, with an incidence between 0.7% and 4.4%. If it occurs, this complication must be accurately diagnosed and treated quickly due to the high incidence of neurovascular complications. If the circulatory and neurological systems are not properly assessed or if treatment is delayed, limb ischemia, soft tissue death, and the need for amputation can occur. Dislocation of a RH-TKA is often a difficult problem to treat. A closed reduction should not be attempted, because it is unlikely to be satisfactory. In addition, in patients with dislocation of a RH-TKA, the possibility of component failure or breakage must be considered. Open reduction of the dislocation should be performed urgently, and provision should be made for revision (that is, the necessary instrumentation should be available) of the RH-TKA, if it proves necessary. The mobile part that allows rotation can have various shapes and lengths. This variance in design could explain why the reported outcomes vary and why there is a probability of tibiofemoral dislocation. Cite this article: EFORT Open Rev 2021;6:107-112. DOI: 10.1302/2058-5241.6.200093