Cargando…
Ultra-High Packing Density Next Generation Microtube Array Membrane for Absorption Based Applications
Previously, we successfully developed an extracorporeal endotoxin removal device (EERD) that is based on the novel next generation alternating microtube array membrane (MTAM-A) that was superior to the commercial equivalent. In this article, we demonstrated multiple different parameter modifications...
Autores principales: | , , , , , , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
MDPI
2021
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC8068329/ https://www.ncbi.nlm.nih.gov/pubmed/33917933 http://dx.doi.org/10.3390/membranes11040273 |
_version_ | 1783683010307031040 |
---|---|
author | Chew, Chee Ho Huang, Wan-Ting Yang, Tzu-Sen Chen, Amanda Wu, Yun Ming Wu, Mai-Szu Chen, Chien-Chung |
author_facet | Chew, Chee Ho Huang, Wan-Ting Yang, Tzu-Sen Chen, Amanda Wu, Yun Ming Wu, Mai-Szu Chen, Chien-Chung |
author_sort | Chew, Chee Ho |
collection | PubMed |
description | Previously, we successfully developed an extracorporeal endotoxin removal device (EERD) that is based on the novel next generation alternating microtube array membrane (MTAM-A) that was superior to the commercial equivalent. In this article, we demonstrated multiple different parameter modifications that led to multiple different types of novel new MTAM structures, which ultimately led to the formation of the MTAM-A. Contrary to the single layered MTAM, the MTAM-A series consisted of a superior packing density fiber connected in a double layered, alternating position which allowed for the greater fiber count to be packed per unit area. The respective MTAM variants were electrospun by utilizing our internally developed tri-axial electrospinning set up to produce the novel microstructures as seen in the respective MTAM variants. A key uniqueness of this study is the ability to produce self-arranged fibers into the respective MTAM variants by utilizing a single spinneret, which has not been demonstrated before. Of the MTAM variants, we observed a change in the microstructure from a single layered MTAM to the MTAM-A series when the ratio of surfactant to shell flow rate approaches 1:1.92. MTAM-A registered the greatest surface area of 2.2 times compared to the traditional single layered MTAM, with the greatest tensile strength at 1.02 ± 0.13 MPa and a maximum elongation of 57.70 ± 9.42%. The MTAM-A was selected for downstream immobilization of polymyxin B (PMB) and assembly into our own internally developed and fabricated dialyzer housing. Subsequently, the entire setup was tested with whole blood spiked with endotoxin; and benchmarked against commercial Toraymyxin fibers of the same size. The results demonstrated that the EERD based on the MTAM-A performed superior to that of the commercial equivalent, registering a rapid reduction of 73.18% of endotoxin (vs. Toraymyxin at 38.78%) at time point 15 min and a final total endotoxin removal of 89.43% (vs. Toraymyxin at 65.03%) |
format | Online Article Text |
id | pubmed-8068329 |
institution | National Center for Biotechnology Information |
language | English |
publishDate | 2021 |
publisher | MDPI |
record_format | MEDLINE/PubMed |
spelling | pubmed-80683292021-04-25 Ultra-High Packing Density Next Generation Microtube Array Membrane for Absorption Based Applications Chew, Chee Ho Huang, Wan-Ting Yang, Tzu-Sen Chen, Amanda Wu, Yun Ming Wu, Mai-Szu Chen, Chien-Chung Membranes (Basel) Article Previously, we successfully developed an extracorporeal endotoxin removal device (EERD) that is based on the novel next generation alternating microtube array membrane (MTAM-A) that was superior to the commercial equivalent. In this article, we demonstrated multiple different parameter modifications that led to multiple different types of novel new MTAM structures, which ultimately led to the formation of the MTAM-A. Contrary to the single layered MTAM, the MTAM-A series consisted of a superior packing density fiber connected in a double layered, alternating position which allowed for the greater fiber count to be packed per unit area. The respective MTAM variants were electrospun by utilizing our internally developed tri-axial electrospinning set up to produce the novel microstructures as seen in the respective MTAM variants. A key uniqueness of this study is the ability to produce self-arranged fibers into the respective MTAM variants by utilizing a single spinneret, which has not been demonstrated before. Of the MTAM variants, we observed a change in the microstructure from a single layered MTAM to the MTAM-A series when the ratio of surfactant to shell flow rate approaches 1:1.92. MTAM-A registered the greatest surface area of 2.2 times compared to the traditional single layered MTAM, with the greatest tensile strength at 1.02 ± 0.13 MPa and a maximum elongation of 57.70 ± 9.42%. The MTAM-A was selected for downstream immobilization of polymyxin B (PMB) and assembly into our own internally developed and fabricated dialyzer housing. Subsequently, the entire setup was tested with whole blood spiked with endotoxin; and benchmarked against commercial Toraymyxin fibers of the same size. The results demonstrated that the EERD based on the MTAM-A performed superior to that of the commercial equivalent, registering a rapid reduction of 73.18% of endotoxin (vs. Toraymyxin at 38.78%) at time point 15 min and a final total endotoxin removal of 89.43% (vs. Toraymyxin at 65.03%) MDPI 2021-04-08 /pmc/articles/PMC8068329/ /pubmed/33917933 http://dx.doi.org/10.3390/membranes11040273 Text en © 2021 by the authors. https://creativecommons.org/licenses/by/4.0/Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). |
spellingShingle | Article Chew, Chee Ho Huang, Wan-Ting Yang, Tzu-Sen Chen, Amanda Wu, Yun Ming Wu, Mai-Szu Chen, Chien-Chung Ultra-High Packing Density Next Generation Microtube Array Membrane for Absorption Based Applications |
title | Ultra-High Packing Density Next Generation Microtube Array Membrane for Absorption Based Applications |
title_full | Ultra-High Packing Density Next Generation Microtube Array Membrane for Absorption Based Applications |
title_fullStr | Ultra-High Packing Density Next Generation Microtube Array Membrane for Absorption Based Applications |
title_full_unstemmed | Ultra-High Packing Density Next Generation Microtube Array Membrane for Absorption Based Applications |
title_short | Ultra-High Packing Density Next Generation Microtube Array Membrane for Absorption Based Applications |
title_sort | ultra-high packing density next generation microtube array membrane for absorption based applications |
topic | Article |
url | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC8068329/ https://www.ncbi.nlm.nih.gov/pubmed/33917933 http://dx.doi.org/10.3390/membranes11040273 |
work_keys_str_mv | AT chewcheeho ultrahighpackingdensitynextgenerationmicrotubearraymembraneforabsorptionbasedapplications AT huangwanting ultrahighpackingdensitynextgenerationmicrotubearraymembraneforabsorptionbasedapplications AT yangtzusen ultrahighpackingdensitynextgenerationmicrotubearraymembraneforabsorptionbasedapplications AT chenamanda ultrahighpackingdensitynextgenerationmicrotubearraymembraneforabsorptionbasedapplications AT wuyunming ultrahighpackingdensitynextgenerationmicrotubearraymembraneforabsorptionbasedapplications AT wumaiszu ultrahighpackingdensitynextgenerationmicrotubearraymembraneforabsorptionbasedapplications AT chenchienchung ultrahighpackingdensitynextgenerationmicrotubearraymembraneforabsorptionbasedapplications |