Study on the photoelectrical performance of anodized titanium sheets

Anodization is a widely used method to obtain multicoloured oxidized titanium sheets. However, most researchers paid great attention to the colour-related properties instead of photoelectrical properties of titanium oxide film obtained by anodization. In this work, to study their photoelectrical properties, a series of multicoloured oxidized titanium sheets were prepared by anodization method, and UV–vis absorption and photocurrents were tested. The relationship between anodization voltages/anodization durations and photocurrents of titanium sheets was studied. Results show that titanium sheets have excellent photoelectrical performance. With the increase of anodization voltage, the number of UV–vis absorption peaks increased under visible light which means increasing absorption. When anodization duration increased, absorption band edge also increased in the visible light region, which means the band gap needed to produce charge transfer transition decreased. Under simulated sunlight and applied voltage of +0.4 V, photocurrent increased with the increase of either anodization voltage or anodization duration, and can be expressed by linear equations. In addition, anodization currents were recorded during anodization. Morphology, crystal structure and photoelectrical properties of anodized titanium sheets were characterized. The anodized titanium sheets can not only be used as decorative material in jewellery and architecture fields etc. but also are supposed to be used as photoelectrical catalyst in further work.