Effect of Cathodic Arc Plasma Deposition on Shear Bond Strength between Palladium Cobalt Chromium Coated with Titanium Nitride and Titanium Aluminium Nitride with Ceramic

BACKGROUND: The success of esthetic ceramo-metal restoration is strongly influenced by its bond strength. The success of ceramo-metal restoration is subjective to its bond strength. AIM AND OBJECTIVES: The aim of this study is to evaluate the shear bond strength between palladium-based cobalt chromium (Co-Cr) alloy coated with titanium nitride (TiNi) and titanium aluminum nitride with feldspathic ceramics. MATERIALS AND METHODS: According to the International Organization for standardization 9693; technical report 1,140,640 samples were prepared using Palladium-based Co-Cr alloy with ×4 vertical projection resting on 5 mm diameter base. The samples were divided into Group: A (control), Group: B (Sandblasted), Group: C (TiNi coated), and Group: D (titanium aluminum nitride coated by cathodic arc plasma deposition, following which feldspathic ceramic application was performed. Shear bond test was performed using universal testing machine and surface analysis was performed using scanning electron microscope. RESULTS: The mean shear bond strength for Group A was 172.994 ± 3.739 N, Group B 209.485 ± 5.913 N, Group C 176.536 ± 4.780 N, and Group D 260.576 ± 16.351 N. Comparison within the groups was made using one-way ANOVA, and multiple group comparisons were made using Tukey's honestly significant difference Post hoc test where the P < 0.001was considered statistically significant. CONCLUSION: Palladium based Co-Cr alloy coated with titanium aluminum nitride by cathodic plasma arc deposition showed maximum shear bond strength with feldspathic ceramic compared to noncoated, sandblasted, and TiNi coated alloy.