EERP-DPM: Energy Efficient Routing Protocol Using Dual Prediction Model for Healthcare Using IoT

Healthcare is one of the most promising domains for the application of Internet of Things- (IoT-) based technologies, where patients can use wearable or implanted medical sensors to measure medical parameters anywhere and anytime. The information collected by IoT devices can then be sent to the health care professionals, and physicians allow having a real-time access to patients' data. However, besides limited batteries lifetime and computational power, there is spatio-temporal correlation, where unnecessary transmission of these redundant data has a significant impact on reducing energy consumption and reducing battery lifetime. Thus, this paper aims to propose a routing protocol to enhance energy-efficiency, which in turn prolongs the sensor lifetime. The proposed work is based on Energy Efficient Routing Protocol using Dual Prediction Model (EERP-DPM) for Healthcare using IoT, where Dual-Prediction Mechanism is used to reduce data transmission between sensor nodes and medical server if predictions match the readings or if the data are considered critical if it goes beyond the upper/lower limits of defined thresholds. The proposed system was developed and tested using MATLAB software and a hardware platform called “MySignals HW V2.” Both simulation and experimental results confirm that the proposed EERP-DPM protocol has been observed to be extremely successful compared to other existing routing protocols not only in terms of energy consumption and network lifetime but also in terms of guaranteeing reliability, throughput, and end-to-end delay.