Techno-economic assessment at full scale of a biogas refinery plant receiving nitrogen rich feedstock and producing renewable energy and biobased fertilisers

Anaerobic digestion of nitrogen (N) rich substrates might be hindered when ammonia (NH(3)) formation reaches toxic levels for methanogenic microorganisms. One possible strategy to avoid inhibiting conditions is the removal of NH(3) from digestate by stripping and scrubbing technology and by recirculating N depleted digestate back to the digester. This study aimed to i) monitor the performance (mass and energy balances) of a full scale digestate processing cascade that includes an innovative vacuum side stream NH(3)stripping and scrubbing system, ii) assess the production cost of ammonium sulphate (AS) solution and iii) evaluate its fertiliser quality. The use of gypsum to recover NH(3) in the scrubbing unit, instead of the more common sulphuric acid, results in the generation of AS and a fertilising liming substrate. Mass and nutrient balances indicated that 57% and 7.5% of ammonium N contained in digestate was recovered in the form of a 22% AS and liming substrate, respectively. The energy balance showed that about 3.8 kWh(el) and 59 kWh(th) were necessary to recover 1 kg of N in the form of AS. Furthermore, the production cost of AS, including both capital and operational costs, resulted to be 5.8 € t(−1) of digestate processed. According to the fertiliser quality assessment, this technology allows for the recovery of NH(3)in the form of salt solutions that can be utilised as a substitute for synthetic mineral nitrogen fertilisers.