Determination of Intrinsic Drug Dissolution and Solute Effective Transport Rate during Laminar Fluid Flow at Different Velocities

The objective of this study was to determine the intrinsic drug dissolution rate (IDR) and the solute effective transport rate of some drugs, using a single particle dissolution technique, satisfying qualified dissolution conditions. The IDR of three poorly water-soluble compounds was measured in milli-Q water using four different fluid velocities. The enveloped surface area of the particles was calculated from the projected area and the perimeter of the particle observed in the microscope. Furthermore, computational fluid dynamics (CFD) simulations were used to theoretically investigate the flow conditions and dissolution rate, comparing box shaped particles and spherical particles with similar dimensions and surface area as the particles used the experiments. In this study, the IDR measurement of the single particles was determined within 5–60 min using particles with an initial projected area diameter ([Formula: see text]) between 37.5–104.6 µm. The micropipette-assisted microscopy technique showed a good reproducibility between individual measurements, and the CFD simulations indicated a laminar flow around the particles at all flow velocities, even though there were evident differences in local particle dissolution rates. In conclusion, the IDR and solute effective transport rate were determined under well-defined fluid flow conditions. This type of approach can be used as a complementary approach to traditional dissolution studies to gain in-depth insights into the dissolution process of drug particles.