Aloe vera Gel Drying by Refractance Window(®): Drying Kinetics and High-Quality Retention

In most cases, conventional drying produces inferior quality products and requires higher drying times. A continuous pilot Refractance Window(®) equipment was used to dry Aloe vera gel slabs of 5 and 10 mm thick at 60, 70, 80, and 90 °C, seeking a dry product with high-quality retention. Based on five empirical models, drying kinetics, diffusion coefficient, and activation energy were analyzed. Midilli–Kuck was the best predicting model. Short drying times (55–270 min) were needed to reach 0.10 g water/g solid. In addition, the technique yielded samples with high rehydration capacity (24–29 g water/g solid); high retention of color (∆E, 3.74–4.39); relatively low losses of vitamin C (37–59%) and vitamin E (28–37%). Regardless of the condition of temperature and sample thickness, a high-quality dried Aloe vera gel could be obtained. Compared with other methods, Refractance Window(®) drying of Aloe vera achieved shorter drying times with higher quality retention in terms of color, vitamins C and E, and rehydration. Finally, the dried Aloe vera gel could be reconstituted to a gel close to its fresh state by rehydration.