Failure Analysis and Prevention of Extraction Column for Methyl Methacrylate Production: Application of the ‘Safety Design’ Concept

To ensure safety and prevent failure of engineering equipment throughout its lifespan, the concept of ‘Safety Design’ is proposed, which covers all the cradle-to-grave phases of engineering equipment, considers at least ten essential factors of failure causes, and conducts root cause analysis at three different scales, in order to proactively control the safety risks before the occurrence of failure rather than passively conduct the remedial measures after failure. Herein, in order to demonstrate how to implement this effective and efficient concept in engineering practice, a case study of failure analysis and prevention is addressed on the extraction column in the production line for methyl methacrylate. Based on the analysis results, the causes were finally determined to be all derived from the stages before operation, including inappropriate design, limited quality inspection of fabrication and installation. Pertinent countermeasures were then proposed from the ‘Safety Design’ point of view, which would not only solve the failure problem for this sole equipment but also contribute to safety risk control of other engineering equipment before operation.