Composite surface roughness and color change following airflow usage

BACKGROUND: Esthetic dental restorations have gained increasing popularity. The surface of restorations should be smooth enough to achieve maximum esthetics and prevent the adhesion of microorganisms and food particles. This study aimed to assess the surface roughness and color change of composite specimens following airflow usage. METHODS: In this in vitro, experimental study, 30 Tokuyama composite discs were fabricated and randomly divided into three groups (n = 10) for the use of airflow with calcium carbonate/bicarbonate powder and conventional polishing with FlexiDisc. The surface roughness of the specimens was measured by profilometry while the color change was assessed by measuring the L*, a* and b* color parameters using spectrophotometry before polishing (T1). The composite specimens were then polished for stain removal, and their surface roughness as well as color parameters were remeasured after polishing (T2). Paired t-test and Tukey’s test were applied for within-group and between-group comparisons. RESULTS: Significant differences were noted in roughness average (Ra) between airflow with calcium carbonate (0.251 ± 0.014 μm) and airflow with sodium bicarbonate (0.421 ± 0.208 μm), and between airflow with sodium bicarbonate and FlexiDisc (0.207 ± 0.076 μm) groups after polishing (P < 0.05). Regarding the correlation of change in surface roughness and color parameters at T1 and T2, an inverse correlation was noted between the change in surface roughness and all color parameters except for L*. In other words, reduction in surface roughness decreased the a* and b* color parameters. CONCLUSIONS: Within the limitations of this study, the results showed that the airflow device used in this study had no significant difference with conventional polishing in terms of reduction in surface roughness and staining. Considering the cost and maintenance of the airflow device, it is not suggested as a suitable alternative to the conventional polishing procedures. Trial Registration Number: This study does not involve human subjects.