Experimental data showing the influence of different boron nitride particles on the silica network, the butyl stearate and the porogens in shape-stabilized phase change materials

Shape-stabilized phase change materials (ss-PCMs) based on silica and butyl stearate were thermally enhanced via the addition of different hexagonal boron nitride particles (BN) to the in situ sol-gel synthesis. The dataset is used in conjunction with the experimental data of the influence of the particle size and surface area of BN on the thermal and mechanical properties of ss-PCMs discussed in Marske et al. (2021). To study the effect of the different BN particles on the hydrolysis degree of the silica network and on the chemical nature of the porogens sodium dodecyl sulfate and poly(vinyl alcohol) used for the ss-PCM synthesis, the ss-PCM samples are measured via High Power Decoupling (HPDEC) Magic Angle Spinning (MAS) (29)Si NMR and attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, respectively. Additionally, data of the influence of BN on the thermal properties is presented as thermogravimetric analysis (TG). The (29)Si MAS NMR spectra are referenced to tetramethylsilane and show the different silica species in ppm. The different value of wavenumber and intensity of each reference and ss-PCM sample is listed in the IR spectra. The decomposition points of the ss-PCMs are calculated from the TG data via OriginLab. The spectra and data can be used as a reference for other researchers and engineers to use in synthesizing ss-PCMs based on silica and other polymeric materials or as reference for pure BN, SDS, stabilized silica sol and PVA.