Physical and Chemical Properties of Waste Foundry Exhaust Sand for Use in Self-Compacting Concrete

The reuse of waste in civil construction brings environmental and economic benefits. However, for these to be used in concrete, it is necessary a previous evaluation of their physical and chemical characteristics. Thus, this study aimed to characterize and analyze the waste foundry exhaust sand (WFES) for use in self-compacting concrete (SCC). Foundry exhaust sand originates from the manufacturing process of sand molds and during demolding of metal parts. It is a fine sand rich in silica in the form of quartz collected by baghouse filter. Characterization of WFES was conducted through laser granulometry, scanning electron microscopy (SEM) in the energy dispersive spectroscopy (EDS) mode, X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG) and derivative thermogravimetry (DTG) techniques. The waste was classified as non-hazardous and non-inert, with physical and chemical properties suitable for use in SCC composition, as fine aggregate or mineral addition. Five mixtures of SCC were developed, in order to determine the waste influence in both fresh and hardened concrete. The properties in the fresh state were reached. There was an increase in compressive strength and sulfate resistance, a decrease in water absorption of self-compacting concrete by incorporating WFES as 30% replacement.