Experimental Research of Ratio between Residual and Elastic Strains ε(res)/ε(E) in High-Strength Concrete Beams Subjected to Bending

In the mechanics of concrete constructions, one distinguishes between residual and elastic strains. Cyclic loadings evoke changes mainly in the elastic strains; however, the total strains are decided by the sum of the residual and elastic strains. The knowledge of the ratio between the residual and total strains allows to predict the total deformations of a construction assuming it is made from an ideally elastic material. This paper presents the effect of the load level at the values of the residual strains for beams made of high-strength concretes and subjected to bending. The investigations showed that the share of residual strains for these concretes differed from the share of residual strains for concretes of lower classes. The investigations were made for cyclically loaded concrete samples and ferroconcrete beams for various relative load levels. The ratio between the residual and total strains was presented in the form of a dependence on the relative load level of the element. An important conclusion was that, after the crack formation, the share of residual stresses reduced, along with the increase in the concrete strength and elastic features of the construction which started to predominate.