Cargando…
Design, characterization, and adsorption properties of Padina gymnospora/zeolite nanocomposite for Congo red dye removal from wastewater
A comprehensive study combined experimental, computational and field experiments was conducted to find out the most appropriate adsorbent system for industrial elimination of congo red (CR) dye from simulated industrial wastewater. Modification of the zeolite (Z) by the Padina gymnospora algae (PG)...
Autores principales: | , , , , , , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
Nature Publishing Group UK
2021
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC8548541/ https://www.ncbi.nlm.nih.gov/pubmed/34702834 http://dx.doi.org/10.1038/s41598-021-00025-y |
Sumario: | A comprehensive study combined experimental, computational and field experiments was conducted to find out the most appropriate adsorbent system for industrial elimination of congo red (CR) dye from simulated industrial wastewater. Modification of the zeolite (Z) by the Padina gymnospora algae (PG) (Egyptian marine algae) was evaluated in terms of the adsorption capability of the zeolite (Z) to remove CR dye from aqueous solutions. The zeolite/algae composite (ZPG) was fabricated using the wet impregnation technique. Various techniques were used to characterize the PG, Z, and the produced ZPG nanocomposite. Batch experiments were performed to study the influence of various practical variables on adsorption processes. The isotherms and kinetics of dye adsorption were also studied. The newly synthesized ZPG nanocomposite exhibits much higher adsorption capacity, especially at low CR concentrations than that of Z. The computational calculations have shown that owing to the presence of intermolecular interactions, the adsorption of the CR molecule on zeolite surfaces is exothermic, energetically favorable, and spontaneous. For all configurations, increasing the zeolite size does not have a noticeable impact on the adsorption energies. The experimental results revealed that the ZPG nanocomposite can be applied as an economical nanoadsorbent to eliminate anionic dyes from simulated industrial wastewater at low CR dye concentrations. The adsorption isotherm of dye onto Z, PG, and ZPG almost agreed with Langmuir isotherm and pseudo-second-order kinetics. The sorption mechanism was also evaluated using Weber's intra-particle diffusion module. Finally, the field experiments revealed optimistic results for the newly synthesized adsorbent in removing dyes from industrial wastewater with 82.1% efficiency, which in turn confirmed the foundation of new eco-friendly materials that aid in the reuse of industrial wastewater. |
---|