Morphological and mechanical properties of biodegradable poly(glycolic acid)/poly(butylene adipate-co-terephthalate) blends with in situ compatibilization

In the present work, the biodegradable blends of poly(glycolic acid) (PGA) and poly(butylene adipate-co-terephthalate) (PBAT) with in situ compatibilization using 4,4′-methylenebis(phenyl isocyanate) (MDI) were prepared. The combined results of FTIR, DSC, SEM, DSC, POM, TGA and rheology demonstrated that the MDI was successfully reacted with PGA/PBAT, the complex viscosity and storage moduli (G′) of the blends were increased. Melt elasticity and viscosity of the blends were also increased on increasing the concentration of PBAT. SEM results indicated that the compatibility was improved by in situ compatibilization. Due to the apparent differences in melting temperature (T(m)) between PGA and PBAT, the morphology of the dispersed phase evolved from a spherical structure to in situ microfiber when the content of PBAT was up to 60% during injection molding. The interfacial adhesion between PGA and PBAT was strengthened, consequently, the impact strength of the blend was sharply increased from 9.0 kJ m(−2) to 22.2 kJ m(−2). On account of the chain extension effect, the crystallinity, crystallization temperature and crystallization size were decreased, which was also of benefit for the improvement of toughness. Meanwhile, the thermal stability of the PGA was improved through blending with PBAT. A novel biodegradable blending material with enhanced toughness and thermal stability was prepared.