Development of Flexible Biceps Tremors Sensing Chip of PVDF Fibers with Nano-Silver Particles by Near-Field Electrospinning

Polyvinylidene fluoride (PVDF) and AgNO(3)/PVDF composite piezoelectric fibers were prepared using near-field electrospinning technology. The prepared fibers are attached to the electrode sheet and encapsulated with polydimethylsiloxane to create an energy acquisition device and further fabricated into a dynamic sensing element. The addition of AgNO(3) significantly increased the conductivity of the solution from 40.33 μS/cm to 883.59 μS/cm, which in turn made the fiber drawing condition smoother with the increase of high voltage electric field and reduced the fiber wire diameter size from 0.37 μm to 0.23 μm. The tapping test shows that the voltage signal can reach ~0.9 V at a frequency of 7 Hz, and the energy conversion efficiency is twice that of the PVDF output voltage. The addition of AgNO(3) effectively enhances the molecular bonding ability, which effectively increases the piezoelectric constants of PVDF piezoelectric fibers. When the human body is exercised for a long period of time and the body is overloaded, the biceps muscle is found to produce 8 to 16 tremors/second through five arm flexion movements. The voltage output of the flexible dynamic soft sensor is between 0.7–0.9 V and shows an orderly alternating current waveform of voltage signals. The sensor can be used to detect muscle tremors after high-intensity training and to obtain advance information about changes in the symptoms of fasciculation, allowing for more accurate diagnosis and treatment.