Performance of concrete containing recycled masks used for personal protection during coronavirus pandemic

After the coronavirus outbreak, a tremendous amount of personal protective equipment has been produced and used by the health service and every human. Proper medical waste management becomes an important problem, which must be solved with a minimal environmental impact. The presented manuscript introduces the recycling process, during which personal protection masks are transformed into polypropylene fibers being an addition to a concrete mixture. The designed recycling procedure provides the entire disinfection of probably contaminated medical wastes, is straightforward, and potentially enables one to modify the properties of the final product. The applied dosage referred to 1 mask per 1 L of concrete. The final product of face masks processing was studied using Fourier-transform infrared spectroscopy, thermogravimetric analysis, surface free energy, contact angle measurements, and melt flow index. The analysis indicated that polypropylene is its main component. Two concrete mixtures were composed, i.e., with the addition of processed masks and the reference one. The following properties were determined to compare the modified concrete with the reference one: compressive and tensile strength, frost resistance, water transport properties, resistance to high temperature. The obtained results indicated that the addition of processed masks slightly increased the compressive strength (by about 5%) and decreased the tensile strength (by about 3%). Simultaneously, it was reported that the addition did not affect material properties related to concrete durability as frost resistance, water permeability, and fire performance. The results evinced, that the addition of processed facemasks into concrete did not deteriorate its properties. Therefore, it is a possible way of the protective masks processing and reusing with the high recycling capacity. Further study should be conducted to optimize the dosing and to modify the properties of PP strings to improve hardened concrete properties.