Fiberglass and Other Flame-Resistant Fibers in Mattress Covers

Public complaints have raised concerns that some mattresses in the current marketplace may be potential sources of airborne fiberglass. Although mattress foam is often marketed as chemical-free, their cover compositions are not as well understood by the general public. To fill these basic information gaps, the covers of four newly purchased mattresses were sampled and analyzed using polarized light microscopy, SEM-EDS, and FTIR microspectroscopy. Two of the mattress covers contained over 50% fiberglass in their inner sock layers. Up to 1% of the fiberglass had migrated to adjacent fabric layers, representing a potential risk of consumer exposure if the zipper on the outer cover is opened. The observed fiberglass fragments had calculated aerodynamic diameters ranging between 30 and 50 µm, suggesting they are potentially inhalable into the nose, mouth, and throat, but are likely too large to penetrate deeper into the lungs. No fiberglass was observed on the brand new mattresses’ outer surfaces. Synthetic fibers also present in the sock layers were consistent with flame resistant modacrylic containing vinyl chloride and antimony. The use of fiberglass and other chemicals in mattress covers poses a potential health risk if these materials are not adequately contained. The apparent non-inclusion of mattress covers in chemical-free certifications suggests that further improvements are needed in mattress labeling and education of consumers.