Application of Pre-Wetted High Titanium Heavy Slag Aggregate in Cement Concrete

High titanium heavy slag is one kind of solid waste that exists in large amounts in the southwest of China. In this paper, this high titanium heavy slag is used as natural pre-wetted material in concrete because of its porous structure. Three kinds of aggregates are used in this concrete. The first one is natural limestone and river sand. The second one is dry slag fine aggregate and coarse aggregate. The third one is pre-wetted coarse slag aggregate and dry slag fine aggregate. The strength, dry shrinkage, autogenous shrinkage, relative humidity, pore size distribution, stress–strain relationship, micro-hardness and chloride penetration of concrete composed of the above three aggregates are tested in this study. The results show that pre-wetted slag aggregate is a suitable internal curing material. The concrete with pre-wetted slag aggregate shows higher strength, lower shrinkage and smaller porosity. The water absorbed in the slag aggregate can be released effectively to increase the relative humidity, accelerate hydration, improve porosity and increase the interface strength.